1/19/2024 0 Comments Lionel icab appOne 6-81499 LCS Power Supply and DB9 cable is required per LCS installation. Again not recently updated but still functional and free. This should be used to operate your trains instead of LCS. This external AC can come from your track power or an accessory transformer (sold separately). You can get the High Rail app that will control trains and allow you to change the operations of the sensor track without physically touching it. An additional AC power source is required for relay operation. This carries commands as well as power for the ASC2's control electronics. In all operating modes, the ASC2 is connected to the LCS system using an LCS PDI cable. Lionel iCab by Lionel, LLC iPhone FREE in the App Store What is it about Use your Apple iPhone or iPod Touch device to operate Lionel TMCC and LEGACY engines, accessories and trains. It provides the core features of a Lionel cab remote, plus the most popular features of the Legacy CAB2 remote. What is iCab iCab is a Lionel App that runs on Apple iPhone and iTouch devices. The ASC2 can be operated from Lionel CAB remotes and/or the LCS App+LCS WiFi. An Apple iPad() is not required to use LCS-it just makes it more fun You can also use the Lionel CAB-1L, LEGACY or iCab remotes to operate LCS. AUX2 toggles the relay on or off, useful for operating lighting. Then, pressing the AUX1 key activates that relay as long as the key is held. In "eight address" mode, the user sets a starting TMCC ACC ID for the first relay and the remaining seven are assigned subsequent TMCC IDs (up to ID 99 for the last relay). This is ideal for uncoupling track activation. This will pulse the relay to that numbered-relay for one second, then shut off. In operation, the user selects that ID, then hits numeric keypad 1-8. In "single address," the user sets a single TMCC "ACC" ID (0-99) for all eight relays. Two addressing schemes are supported in accessory mode. Each of these two banks has a common terminal feed. Accessory mode is configured as 8 normally open relays, split into two banks of four. When configured in accessory mode, up to eight lights, uncoupling tracks or basic on/off accessories can be controlled. The starting TMCC "SW" address (0-96) is user configurable and the next three switches are assigned the three subsequent IDs. One pair of relays will activate the "THRU" position with one set of contacts, and the other set of contacts will activate the "OUT" position. The ASC2 has eight Normally Open relays, with four banks of two complementary outputs. Features When configured in switch mode, an ASC 2 operates up to four remotely operated switches from Lionel and other manufacturers. The ASC2 can be configured to ¢switch mode¢ or two types of ¢accessory mode¢ operation. Add more functionality with Optional Add-on Component of the Layout Control System.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |